Select Page
clip_image002

WNV Deep Dive Part 3 – Capturing and Reading Virtualized Network Traffic

By James Kehr, Networking Support Escalation Engineer There are three primary tools used to capture virtual network traffic in Windows: netsh trace, the PowerShell NetEventPacketCapture module, and Message Analyzer. I won’t focus much on Message Analyzer captures here. Most server ... continue reading

WNV Deep Dive Part 2 – How WNV works

By James Kehr, Networking Support Escalation Engineer To understand Windows Network Virtualization (WNV) capture data you first need to understand what you’re looking at. Which is hard when you may not understand what goes on inside of Windows. This article ... continue reading

WNV Deep Dive Part 1 – Introduction to Containers and Windows Network Virtualization

By James Kehr, Networking Support Escalation Engineer When I started writing this article it was going to be about Container networking, and nothing but Container networking. As the article progresses I realized there was a lot of useful information that ... continue reading
The Evolution of RDMA in Windows: now extended to Hyper-V Guests

The Evolution of RDMA in Windows: now extended to Hyper-V Guests

This post written by Don Stanwyck, Senior Program Manager, Windows Core Networking Remote DMA (RDMA) is an incredible technology that allows networked hosts to exchange information with virtually no CPU overhead and with extremely little latency in the end–system. Microsoft ... continue reading
SuperServer 2028U-TRT+

Ultimate Performance for Database Storage with Windows Server 2016 and Hyper-converged Infrastructure

High-performing all flash array storage solution using Storage Spaces Direct on Windows Server 2016continue reading
Configure the Network Ports on a Windows Cluster

Configure the Network Ports on a Windows Cluster

Windows clustering requires the network configuration be complete and accurate. The network ports should be configured with IP Addresses, DNS, Default Gateways and any other relevant networking details. The DNS IP address will likely be your Active Directory servers, otherwise you ... continue reading
change network adapter settings

Configure Network Ports on Windows Clustered Systems

Each node of a Windows Cluster should be configured exactly the same including the networking parameters (other than unique IP addresses for each system). Configure IP Addresses Every node on a Windows Cluster should be configured with IP Addresses DNS ... continue reading

Installing Mellanox Network Card Device Drivers

The drivers for the Mellanox NIC card may already be on the Windows distribution, but should be updated to the latest version.   Download the drivers and run the setup file that comes with the driver package. Datasheets and documentation: ConnectX®-3 EN ... continue reading
Hyperconvergence Lab Overview

Storage Spaces Direct – Lab Environment Setup

This article discusses the lab configuration built to test the features and operation of Windows 2016 Storage Spaces Direct as a complete hyper-converged server infrastructure. Hyper-Converged Lab with Storage Spaces Direct Argon Systems has partnered with hardware technology companies Supermicro and ... continue reading