Hello everyone. It’s Rafal Sosnowski from Microsoft Dubai Security PFE Team. Recently I have been requested by my customers to explain Bitlocker Network Unlock. So here you go.
Network Unlock is a relatively new Bitlocker protector (added in Windows 8) that can be used to unlock computers after the reboot without need of entering Bitlocker PIN.
This is very helpful in scenarios where all workstations protected by Bitlocker with TPM+PIN need to be restarted due to monthly maintenance or after power outage. Another scenario is when you don’t want to bother your users in corporate network with PIN prompt but require it when user takes laptop home.
For Network Unlock to work you need to meet some prerequisites mentioned below including having DHCP Server, WDS Server, UEFI capable clients and special certificate deployed by the GPO. Network unlock uses MS-NKPU protocol encapsulated into DHCP packets.
How Network Unlock Works:
The whole process of unlocking the Operating System drive encrypted by Bitlocker with network unlock feature is split into three phases:
In first phase client that is configured to use network unlock has to obtain valid IP address from the DHCP server. This DHCP request is sent from UEFI firmware not from DHCP client service in the Operating System. We also assume that proper GPO is configured on the client which enables Network Unlock and delivers special certificate used to encrypt message sent in next phase.
In this phase clients will broadcast MS-NKPU request which is encapsulated into DHCP INFORM packet and is containing Bitlocker key material encrypted with the WDS certificate public key from the GPO. Also this packet will contain 256-bit session key used later to protect the data exchange.
When Network Unlock server receives the MS-NKPU Request, it will decrypt it with corresponding private key of WDS certificate and send back the Bitlocker Key material encrypted with the session key. Because client generated this session key in previous step, it will decrypt the Bitlocker key material easily. Client now will be able to unlock its drive and allow user to log on to the system.
DHCP server provides IP address to the clients in the pre-OS boot environment. DHCP Server is required when you are using IPv4 and is optional if you are using Ipv6 due to auto configuration with link-local Ipv6 address. Network Unlock on the client uses its linked local address to create DHCPv6 request packet, so it works without configuring a DHCPv6 server. You can configure both DHCPv4 and DHCPv6 scopes on the same machine or on different machines/devices. If you have DHCP and client computers in different subnets you will have to configure DHCP Relay agent on your router.
WDS server as a separate server role or part of the SCCM and is required to provide PXE functionality (Pre-boot Execution Environment). PXE is mainly used to install or boot operating system from the network but in this case it will answer all NKPU requests arriving to the server. Indeed, WDS server is a hosts for special Network Unlock provider which answers these requests.
NKP Provider is added to the server during Network Unlock feature installation and is loaded to memory when WDS service starts. Corresponding event will be also logged in the: Applications and Services LogsMicrosoftWindowsDeployment-Services-DiagnosticsDebug
Event ID: 24577
[WDSServer/WDSPXE] NKPPROV Provider initialized successfully.
Note: this log is disabled by default. You need to explicitly enable it in the Eventvwr.msc
Also you can verify if provider has been registered successfully under:
It is also possible to configure list of IPv4 or IPv6 subnets on WDS server, in classless inter-domain routing (CIDR) notation, from which clients are permitted to be unlocked.
Network Unlock Feature
On the WDS server you need to install Bitlocker Network Unlock feature using Server Manager or command line:
This process will register small DLL (nkpprov.dll) as a separate PXE provider plugged into the WDS server. This provider listens to all DHCPv6/v4 broadcast packages on the network, and will only respond if the package is for Network Unlock. It will not respond to normal DHCP/PXE packets.
Clients have to be Windows 8 or above with support for UEFI spec 2.3.1. Clients also have to have TPM enabled, activated and with ownership taken by the system. Network Unlock can work with both wired and wireless networks, however there are not many platforms supporting PXE/DHCP over Wireless in pre boot environment.
Client doesn’t have to have TPM+PIN nor TPM protector configured on the OS drive although it is best practice to use TPM+PIN protector. Network unlock protector is in fact combination of 2 protectors: TPM + certificate as shown in the picture below:
So yes it is possible to use Network Unlock protector without having TPM+PIN added to the OS drive, however in normal circumstances it is recommended to have it.
Special certificate with OID 126.96.36.199.4.1.3188.8.131.52 (Bitlocker Drive Encryption OID) has to be obtained from the Certification Authority Server* and imported into FVENKP computer store on the WDS server:
This certificate is used to encrypt Bitlocker Key Material sent by client to the WDS server. Only WDS server can decrypt it with its private key and send back to the client.
You can verify if certificate is present using certlm.msc or command line:
Certutil -verifystore FVENKP
*Self-signed certificates are also supported.
Above WDS certificate (public key) has to be deployed to all computers that will be using network unlock feature. Simplest way is to use GPO
Computer ConfigurationPoliciesWindows SettingsSecurity SettingsPublic Key PoliciesBitlocker Drive Encryption Network Unlock Certificate:
or registry: HKEY_LOCAL_MACHINESoftwarePoliciesMicrosoftSystemCertificatesFVE_NKP
Also policy “Allow network unlock at startup” has to be configured on all client computers via GPO:
Computer ConfigurationAdministrative TemplatesWindows ComponentsBitLocker Drive EncryptionOperating System Drives
If we take a look at the network trace, we see that after obtaining IP address from the DHCP server 10.0.0.10 (DORA process) client 10.0.0.150 sends DHCP Inform packet with Vendor Class ID: Bitlocker. This is a request to Network Unlock Server containing session key, certificate thumbprint and Bitlocker key material encrypted with certificate public key deployed earlier by the GPO.
Bitlocker key materials is concatenated from Option 43 (0x2B) and Option 125 (0x7D) of that packet.
In the response server will send us Bitlocker Key which was decrypted by Network Unlock server private key. To protect this material server will encrypt it with the session key. This is encapsulated into DHCP reply with Opcode: BootReply:
After obtaining Bitlocker Key Material from the Network unlock server, client will use session key to decrypt it and unlock the volume.
DHCP v6 can be disabled in some of the UEFI implementations from the UI. If you want to make sure that Network unlock happens only via IPv4 you need to disable IPv6 on the network card of WDS server. Bootmgr code on the client will first try to unlock via DHCPv6 and failover to DHCPv4.
Network Unlock still uses TPM to check integrity of the platform. So if the values in the PCRs (Platform Configuration Registers) have changed due to, for instance: BIOS upgrade, replacement of motherboard, malware in the boot components etc. you will be still prompted for Bitlocker Recovery Password. Entering this password cannot be automated in any way.